Masterbatch for Plastic Pipe Extrusion

Model NO.: BA-02 Usage: General Plastics, Engineering Plastics, Specialty Plastics, Blow Film Plastic Forming Method: Extrusion Filler: Talc Carrier Resin: PE Adding Ratio: 5-50% Mfi: 2-6 Trademark: HOLY Origin: China Material: Powder and Plastic Plastic Properties After Heated: Thermoplastic Plastics Color: White Filler Mesh: 1500 Density (g/cm3): 1.6-1.7 Filler Content: 80% HS Code: 3824909990, 3824909990 Specification: content 80%-85%                              plastic pipe extrusion


Product advantages:
1.The oil absorption of the powder  value is low,  with good fluidity and dispersion, so its the good surface finish of the products.
2. Light Specific grativity, high transparent and brightness, the refractive index close to the PP,PE
3. The high adding ratio is more than 50%.
4. Good dispersion, donnot separate out.
5. Good heat sealing properties, high tensile strength
6. Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property,  improve the strength and toughness of the product.
7. Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding
Product Data:

Name	Talc Filler Masterbatch
Surface Color	White
Filler	Talc
Filler Mesh No.	1500
Filler Content	≤85%
Carrier Resin	PE
MFI (g/10min)	2-6
Density (g/cm3)	1.6-1.7
Melt Temperature	160
Mositure	<=0.01
Adding ratio	5-50%
Application	Film blowing, Injection molding, Blister etc.
Packing	25KG compound woven bags, or customized
Storage	Keep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.

 Product applications: a. Blow Film ( shopping bags, casting film, multilayer film, etc.)
b. Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
c. Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
d.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)
e. Fiber ( Carpet, Textiles, Upholstery, etc.

Production & Factory:

Packaging and Delivery:
1. Net weight: 25kg/bags.
2. Compound woven bags.
3. Customerized packaging.
4. Sutible for see transpportation

Company Qulification:

Welcome to contact:

 

Contact us if you need more details on Baso4 Filler Masterbatch. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Masterbatch Plastic Injection Use、Filler Masterbatch. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Filler Masterbatch > BaSO4 Filler Masterbatch