Welcome to Yang TianEnvironmentalMasterbatchCo.,Ltd.
Your Satisfaction is our greatest pursuit!
CaCO3 masterbatch is an additive/CaCO3 for polyolefin resin,it's reduced production cost and gives calorific quantity,dimensional stability,printability,productivity,FM25 CaCO3 masterbatch is made of 75%-85% CaCO3 powder, it can wildly use in high grade thin film,shed film,mulch film and other product which made of virge PE
|Code ||FM25 |
|Carrier ||PE |
|MFI(g/10min) ||15.0-25.0 |
|CaCO3 Powder size ||2500 Mesh CaCO3 powder |
|CaCO3 Content ||>70% |
|Density ||>1.85+/-0.1g/cm3 |
|Moisture Content ||1.0g/cm3 |
|Addition Rate ||10%-40% |
|Color || White |
|Packing ||25KG/Bags |
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)
Packing and shipping:
Yang Tian Environmental Masterbatch Co.,Ltd. was founded in 2002, which located in Guangzhou City, Guangdong Province. After more than 10 years of development, Guangzhou Yang Tian has become a professional Plastic Material manufactory in southern China with 3 sub factories. One is Lianzhou Jinkun Plastic Factory which was founded in 2002,covering an area of about 10000 square meters. It is located in Jingang Industrial Park, Lianzhou City. The second one is Guanzhou Huadu Tanbu Environmental Material Factory, which established in 2004, covering an area of 6000 square meters. It is located in Tanbu Town, Huadu District, 40 minutes' drive way from Huanpu Port.
Relevant exhibition photos:
F A Q
Q1. How to use masterbatch?
A: Simple for using, just mix up with the resin granules according to the dosage ratio under appropriate temperature.
Q2. The difference between the general use and the special purpose masterbatches?
-1:Special purpose masterbatch: used as the same material as carrier. For example, ABS products often use master batches based on ABS.
-2:General use masterbatch: Use one resin as carrier, but also can be used for coloring other resins.
In general, it’s easy to use this masterbatch but there are some shortcomings.
A. Poor predictability of the color.
The final color changes according to the change of resin.
B. Affect other characters of plastic products.
Especially the hardness of products for it’s easy to be deformed and distorted, especially for engineering plastic
C. Higher cost
General use masterbatches often use pigments which have higher heat resistance grade and higher cost.
Q3. How long the masterbatch could be stored?
A :If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period store,for the pigments fixed on the carrier resin which stay in a closed state.
Q4. Does the masterbatch need to be dried before use?
A :In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method
Q5. Does the masterbatches influence the property of products?
A :Some pigments have effect on flame resistance.If used for flame resistance products should be mentioned as first.
More products for choosing:
Tel: +86 17688241408